Born in Liling, Hunan, China, 1970.
B.S. Chinese University of Mining and Tech,1992.
M.S. Zhejiang University, 1995.
Ph.D. Zhejiang University, 2000.
The State Key Lab of CAD&CG, Zhejiang University.
310027, Hangzhou, China.
● Model-driven Engineering Design; Model-based Systems Engineering (MBSE)
● Multi-disciplinary Mechatronic System Modeling, Design and Simulation
● CAD/CAE/CAM Integration & Virtual Prototyping
● 3D Model Retrieval & Knowledge Reuse
 Zhongfei Sun, Yusheng LIU. A novel automated functional decomposition approach for aystem design of mechatronic products. ADDE 2011, Shanghai, Aug. 26-28.
 Yue Cao, Yusheng Liu, Christiaan J.J. Paredis. System-level model integration of design and simulation for mechatronic systems based on SysML. Mechatronics, 2011,21(6):1063-1075.
 Huang Yuanghao, Liu Yusheng, Hung S. Y. Dynamic phase evaluation in sparse-sampled temporal speckle pattern sequence. Optics Letters, 2011, 36(4): 526-528
 Huang Yuanhao, Janabi-Sharifi Farrokh, Liu Yusheng, et al. Dynamic phase measurement in shearography by clustering method and Fourier filtering.. Optics Express, 2011, 19(2): 606-615
 Hu baokun, Liu Yusheng, Gao Shuming. Parallel Relevance Feedback for 3D Model Retrieval Based on Fast Weighted-Center Particle Swarm Optimization. Pattern Recognition,43: 2950-2961, 2010.
 Cao Yue, Liu Yusheng, Chris Paredis. Integration of system-level design and analysis models of mechatronic system behavior based on SysML and Simscape. Proc. of the ASME 2010 IDETC/CI E, Aug. 15-18, 2010, Montreal, Quebec, Canada. (Best paper of SEIKM Committee)
 Cao Yue, Liu Yusheng. Uniform behaviour modelling for mechatronic systems based on SysML parametric diagram: A case study. Proc. of the TMCE 2010, April 12–16, 2010, Ancona, Italy.( Recommended to Int. J. of Computer aided engineering and technology)
 LIU Yusheng, Gao Shuming, Cao Yanlong. An Efficient Approach to Interpreting Rigorous Tolerance Semantics for Complicated Tolerance Specification. IEEE Transaction on automation science and engineering, 6(4):670-684, 2009.
 Zhao Wei, Gao Shuming, Liu Yusheng, Lin Hongwei. Poisson Based Reuse of Free-form Features with NURBS Representation. Computers in Industry, 2009,60(1):64-74.
 HU Baokun, LIU Yusheng, GAO Shuming. Fast Weighted Center Particle Swarm Optimization. The 8th IEEE/ACIS Int. Conf. on Computer and Information Science (ICIS 2009), Shanghai, China, June 1-3, 2009.
 Tang Jianguo, Gao Shuming, LIU Yusheng. An Evaluation Index for Estimating Defeaturing– Induced Impacts on Finite Element Analysis[DETC2009 ‑87115]. ASME IDETC/CIE’2009, San Diego, CA, USA. Aug. 29-Sept. 2, 2009
 Cao Weijuan, Wu haipang, Jiang Yuqin, Liu Yusheng, Gao Shuming. Representation and Automated Generation of Analysis Feature Model for Finite Element Analysis [DETC2009‑86322]. ASME IDETC/CIE’2009, San Diego, CA, USA. Aug. 29-Sept. 2, 2009
 Fan Yamin, Zhang Mabiao, and Liu Yusheng. 2D Partial Similarity Estimation Based on Energy Segmentation — II. Feature based Similarity Calculation. Global Congress on Intelligent Systems(GCIS), Xiamen, China, 2009，May,18-22.
 Ye Xiaoping, Zhang Mabiao, and Liu Yusheng. 2D Partial Similarity Estimation Based on Energy Segmentation I: Segmentation. Global Congress on Intelligent Systems（GCIS）,Xiamen, China, 2009，May,18-22.
 Bai Jing, Gao Shuming, Tang Weihua, Liu Yusheng, Guo Song. Semantic-based partial retrieval of CAD models for design reuse. 2009 SIAM/ACM Conference on Geometric and Physical Modeling，Oct 5-8, 2009, San Francisco.
 白静, 唐韦华, 刘玉生, 高曙明. 面向实体模型相似评价的层次图生成与高效匹配. 计算机辅助设计与图形学学报，2009, 21(7): 869-879.
 Chuhua Xian, Shuming Gao, Hongwei Lin, Yusheng Liu, and Dong Xiao. FEA-Mesh Editing with Feature Constrained. CAD/Graphics 2009, Aug.19—22. Yellow Mountain City, China.
 HU Baokun, LIU Yusheng, GAO Shuming. Partial Relevance Feedback for 3D Model Retrieval. Int. Symp. On Computer Science and Computational Tech., Dec. 20~22, 2008, shanghai, China.
 白静，唐韦华，刘玉生，高曙明. 面向实体模型相似评价的层次图生成与高效匹配研究. 全国第15届计算机辅助设计与图形学会议，大连，2008.7.22-24.
 白静，刘玉生，高曙明. 基于局部蔓延的多层次实体模型检索. 计算机辅助设计与图形学学报, 2007, 17(4)： 480 –485.
 Jianhua LI, Shuming GAO, Yusheng LIU. Solid-based CAPP for surface micromachined MEMS devices. Computer Aided Design. 2007, 39(3) 190-201.
 叶晓平，刘玉生. 具有不等定位公差约束的轴线特征变动建模及其实现. 机械工程学报. 2007，43(5)：167-174.
 BAI Jing, LIU Yusheng, Ga o Shuming. Multi-mode solide model retrieval based on partial matching. Proc. Of 2007 10th IEEE Int. Conf. on Computer-Aided Design and Computer Graphics. Beijing, China. Oct. 15-18, 2007.
 HU Baokun, LIU Yusheng, Gao Shuming. Parallel global optimal approach of feedback for 3D CAD model retrieval. Proc. Of 2007 10th IEEE Int. Conf. on Computer-Aided Design and Computer Graphics. Beijing, China. Oct. 15-18, 2007.
 XIAN Chuhua, LIU Yusheng, Gao Shuming. Constructive MA generation for 2D models. Proc. Of 2007 10th IEEE Int. Conf. on Computer-Aided Design and Computer Graphics. Beijing, China. Oct. 15-18, 2007.
 Liu Yusheng, Gao Shuming. Generating Variational Geometry of a Hole With Composite Tolerances. IEEE Transactin on Automation science and technology. 3(1):92-107, 2006.
 Ye Xiaoping, Liu Yusheng. An Efficient Similarity Assessment Approach of 3D Models Based on Frequency Spectrum. Journal of Computational Information Systems 1(2): 203-213,2006.
 Gao Shuming, Zhou Guangping, Liu Yusheng. A Divide-and-Conquer Algorithm for Machining Feature Recognition Over Network. ASME’2005 DETC/CIE84912, Long Beach, CA, USA. Sept. 24-28.
 Gao Wei, Gao Shuming, Liu Yusheng. 3D CAD Model Similarity Assessment and Retrieval Using DBS. ASME’2005 DETC/CIE84912, Long Beach, CA, USA. Sept. 24-28.
 Li Jianhua, Liu Yusheng, Gao Shuming. Mask Synthesis and Verification based on geometric model for surface micro-machined MEMS. J. of Zhejiang University Science. 6A(9):1007-1010, 2005.
 Li Jianhua, Gao Shuming, Liu Yusheng. Feature based process layer modeling for surface micromachined MEMS. J. Micromech. Microeng. 15(3):620-635, 2005.
 Liu Yusheng, Gao Shuming, Cao Yanlong. Generic Approach to Generating Variatioal Geometry of Holesin Three Dimensional CAD Systems. Chinese Journal of Mechanical Engineering. 41(7):112-118, 2005.
 Liu Yusheng, Gao Shuming. Variational Geometry Based Tolerance Pre-evaluation for Pattern of Holes. J.of Production Research. 42(8):1659-1675, 2004.
 Li Jianhua,Gao Shuming, Liu Yusheng. Automated Generation of Layered Model for Surface Micro-machined MEMS. Int. J. of Computer-Aided Design and Application. 1(1):137-146, 2004.
 Liu Yusheng, Gao Shuming, Wu Zhaotong, Yang Jiangxin. Feature based Hierarchical Tolerance Representation Model. Chinese J. of Mechanical Engineering. 39（3）：1-7, 2003.
 Liu Yusheng, Gao Shuming, Wu Zhaotong, Yang Jiangxin. An approach to Representing 3D tolerance Semantics based on Mathematical Definition. 14(3):241-245, 2003.
 Li Jianhua,Gao Shuming, Liu Yusheng. Generation of Surface Micromachined MEMS process model based on Geometric Model. CIMS. 9（12）：1126-1131, 2003.
 Liu Yusheng, Gao Shuming. An Approach for Generating Variational Geometry of A Pattern of Holes with Composite Positional Tolerances. ASME’2002 DETC/DAC34233. Montreal, Canada, September 29-October 2, 2002.
 Liu Yusheng, Yang Jiangxin, Wu Zhaotong. A Mathematical Model of Symmetry Based on Mathematical Definition. Journal of Zhejiang University. ( in English ). 2002,2(1).
 Liu Yusheng. A Mathematical Model For Straightness Based on DOF Variation. Engineering Design( in Chinese) 2002, 9(1).
 Liu Yusheng, , Wu Zhaotong Yang Jiangxin. Mathemathical model of size tolerance for plane based on mathematical definition. Chinese Journal of Mechanical Engineering( in Chinese ). 2001,31(9).
 Liu Yusheng, , Wu Zhaotong Yang Jiangxin, Gao Shuming. A survey of modeling and representation of tolerance information in CAD systems. Journal of computer aided design & computer graphics.( in Chinese) 2001, 13(11).
 Liu Yusheng, Yang Jiangxin, Wu Zhaotong. Fuzzy Optimal design of concurrent tolerance. Journal of Zhejiang University(Engineering ). 2001.35(1).
 Liu Yusheng. Research On Tolerance Analysis of Visualization. Engineering Design( in Chinese) 2001, 8(4).
 Yang Jiangxin, Liu Yusheng, Tang Jianrong , Wu Zhaotong. A CAD Model for Concurrent Tolerance. Chinese Journal of Mechanical Engineering(in English). 2000,13(2).
 Liu Yusheng, Yang Jiangxin, Wu Zhaotong. Machining Capability Oriented Tolerance Reverse Design. Chinese Mechanical Engineering( in Chinese ). 2000.11(6).
 Liu Yusheng, Wu Zhaotong. An evaluation method of technology economics for multi process planning. Mechanical Manufacturing( in Chinese). 2000.38(7).
 Liu Yusheng, Yang Jiangxin, Wu Zhaotong. A CAD Model for Geometric Tolerance( in English). The 6th international conference of CAD/CG. Shanghai. 1999.12：29-34.
 Liu Yusheng, Wu Zhaotong, Fang Hongfang Optimal design of tolerance in the integration of CAD/CAPP. Journal of Zhejiang University(Engineering ). 1999.
(1) "Research on SysML-based Automatic Modeling of System-Level Multi-Domain Coupling of Complex Products" (No. 61173126) Supported by National Natural Science Foundation of China. 2012.1 – 2015.12
(2) "Research on System-level model integration of design and analysis for complex mechatronics" (No. R1110377). Supported by Zhejiang Provincial Outstanding Natural Science Foundation of China. 2011.1-2014.12
(3) "Simulation and Optimization of Orange Peeling Equipment " Supported by the 863 High-Technology Project of China (No. 2011AA100804). 2011.1-2015.12
(1) “3D Model retrieval platform for supporting product creative design”(2008C01048-1). Key project of Zhejiang province. 2009.1-2010.12.
(2) “Research on System-level integration of design and analysis based on SysML” (No. 61070064). Supported by National Natural Science Foundation of China. 2011.1 – 2011.12
(3) “CAE Platform for mechanical systems”(No. 2009AA044501). Sub-project of Key 863 project. 2010.1-2011.12
(4) “Creative product design based 3D geometric resource reuse” (No. 2005C21096), Key project of Zhejiang Province. 2005.1-2006.12
(5) “Integration of Collaborative Design and ERP for Print&Package Enterprise” (No. 2005C11050), Key project of Zhejiang Province. 2005.6-2007.6
(6) “MEMS component function modeling based on solid model”. Project of aerospace support technology. 2006.1-2007.12
Copyright 2010 Yusheng LIU
Latest update: Feb. 24, 2012